DB Name: E193MOD
Max thickness: 11.9% at x = 31.92% chord
Max camber: 4.1% at x = 41.73% chord
Available data sources:
JavaFoil+Calcfoil stall+Eppler ext transition
Wind Tunnel (SoarTech 8)
Dale Folkening generated the E193MOD by scaling the ordinates of the E193 by a factor of 1.19, effectively adding camber and thickness. The result increases the lift (as indicated by the change in the zero-lift angle of attack) and the width of the polar. There is an associated slight increase in drag, owing mostly to the added thickness.
Coordinates from SoarTech 8
Wind tunnel data from the UIUC Low-Speed Airfoil Test Program.
The UIUC wind tunnel data is covered by the GNU GPL and the airfoil performance data is copyrighted, and restrictions are placed on its use.
The data may be freely copied and used in any way, e.g., for personal use, in magazine articles or with a commercial product. If the data is used in a magazine article or book, the author must reference the appropriate volume of Summary of Low-Speed Airfoil Data and give the address of where it can be obtained. If the data is used in a commercial product, there must be no extra charges for providing it - other than the cost of reproduction and distribution. All products that make use of this data must conspicuously state that it was produced under the UIUC Low-Speed Airfoil Test program, and no restrictions can be placed on the recipient with respect to their use of the source data. Furthermore, they must be allowed to copy the original data and freely distribute it as well.
A copy of the license, the copyright notice and the UIUC Low-Speed Airfoil Tests Manifesto (manifest.html) must be included with each distribution of the data.