MID 106


Direct link: MID 106
Info | DAT and DXF files | Shape | Venkataraman Fit | Applications (0) | Similarly shaped airfoils
Plain Flapped Shapes: 25% flap chord | 30% flap chord | 35% flap chord | 40% flap chord
Basic Data: cl vs α | cd vs α | cm vs α | cl/cd vs α | cd vs cl | cl/cd vs cl | cl vs cd | cm vs cl | Curve fits | Lift curve slopes
Data source comparison (Codes, CFD, Wind tunnel)
Compressibility Effects: cl vs α | cd vs α | cm vs α | cl/cd vs α | cd vs cl | cl/cd vs cl | cl vs cd | cm vs cl
Roughness Effects: cl vs α | cd vs α | cm vs α | cl/cd vs α | cd vs cl | cl/cd vs cl | cl vs cd | cm vs cl
Plain Flap Effects: cl,max vs flap deflection: all flap chords | 25% flap chord | 30% flap chord | 35% flap chord | 40% flap chord
Plain Flap Effects: cl vs α for various flap deflections: 25% flap chord | 30% flap chord | 35% flap chord | 40% flap chord
Plain Flap Effects: cm vs α for various flap deflections: 25% flap chord | 30% flap chord | 35% flap chord | 40% flap chord
Plain Flap Effects: cd vs α for various flap deflections: 25% flap chord | 30% flap chord | 35% flap chord | 40% flap chord
Disclaimer: All information presented herein is delivered without guarantee or warranty of any kind. The user assumes the entire risk of use of this information.
MID 106
Family: Midic
Max thickness: 7.5% at x = 23.08% chord
Max camber: 4.4% at x = 47.86% chord
Available data sources:
JavaFoil+Calcfoil stall+Eppler ext transition

Notes:


Coordinates from TraCFoil.
Commercial use of the airfoil may be restricted by the designer's copyright.
For P-30 rubber powered. Airfoil MID 106 has thickness of 7.5%c, camber of 4.4%c, leadind edge radius of
0.55%c, and trailling edge gap of 0.5%c. It is similar to MID 105, only
differrence is a little more cambered top surface in last part of cord.